![]() |
|
#10
|
||||
|
||||
|
Quote:
I assume that this is the set pictured on ETF: http://www.earlytelevision.org/delco_car_tv.html For a CRT, I'd buy one of the inexpensive universal test CRT's and use that until you get the thing working. I suspect that the set used a round glass 7 inch magnetic deflection tube, not the 8AP4 which was a metal bell CRT. The style of mounting bracket is rarely used for metal tubes. First, I question it being made for a car. I suspect that it was intended to be used as a field survey monitor and mounted inside the back end of a small panel truck and it could be used in remote areas where there was no AC available. There appears to be a nameplate on the chassis. What does it say? You also seem to be missing the complete power supply, which probably would be mounted on a different chassis. Unless you can find more information about the set, you probably will have to reverse engineer the set to build a power supply. Test CRT's are discussed on: http://videokarma.org/showthread.php?t=252335 You can find additional tube data here: http://tubedata.tigahost.com/tubedat...37/5/5AXP4.pdf http://tubedata.tigahost.com/tubedat...168/8/8XP4.pdf James. Last edited by earlyfilm; 11-06-2013 at 12:33 PM. Reason: Added links for Test CRT's |
| Audiokarma |
| Thread Tools | |
| Display Modes | |
|
|