Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Vintage TV & Radio Tech Forum

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #6  
Old 10-27-2013, 10:55 AM
Username1's Avatar
Username1 Username1 is offline
Not sure how I got here.
 
Join Date: Dec 2009
Location: Orange County NY
Posts: 3,668
Well, so for that red and white thing, It looks like it is a cabinet, so its large. And it looks like it has a fold in the metal, If it can't be taken apart, I personally would not use a chemical on it. If it were mine, I would either sand blast it, or sand remove, wire wheel, then heat it to 200 degrees, wash it with automotive etching solution, which washes off with water, use boiling water, and heat it up the rest of the way to 220 and be sure everything is dry in that crease, or crimp. Use compressed air, or nitrogen to blow it out. Then use automotive etching primer. Then regular primer, then paint it.

You will have to do the etching to etching primer pretty quick, as the etching solution makes the metal ready to oxidize, within 20 minutes....

As for a chassis, I like the idea someone said to use wax. I have a scratch in the car, I keep it waxed, and no rust.... Even up here in NY Salt Hell....
__________________
Yes you can call me "Squirrel boy"
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:30 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.