Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #15  
Old 09-19-2013, 01:49 PM
zeno's Avatar
zeno zeno is offline
VideoKarma Member
 
Join Date: Mar 2013
Location: New Hampshire
Posts: 4,918
Quote:
Originally Posted by TinCanAlley View Post
I have an NOS replacement for the damper diode. I can test the original and compare it to the new. Should just put the new one in since it's an important component.

What is the tripler "ref post"?

Speaking of triplers....a bad tripler wouldn't cause the problem I'm having, could it? If so, I do have the new tripler with built-in focus. Was keeping it more as a spare since I have the new focus divider installed.
A tripler will cause it. So can yoke, HOT bias, the white caps, FBT or any
heavy load or mismatch on the FBT. The ref. is the ABL terminal. If you
dont do the bulb at least do the heat check. But if its really loaded
down the HOT will INSTANT death. We used the variac to bring
them up slowly & watch the current but ive used the bulb also.
It will protect the HOT & save $$.

73 Zeno
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:22 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.