Quote:
Originally Posted by DaveWM
I would not recommend re-engineering the use of the mica sheets. Make sure you examine parts closely to make sure where mica is present or not present.
|
Have the chassis out and found that there are three pieces of mica on the HOT and the screws never touch the chassis. The go through a bigger hole and the threads are actually on the isolated board.
One of the mica pieces came apart trying to remove, but the other two are in good shape. I'm actually going to try the NTE Thermopads. They take the place of the mica and compound.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|
09-19-2013, 01:30 PM
Threaded Mode