![]() |
|
|
|
#1
|
||||
|
||||
|
The bending is NORMAL on that set. I am pretty sure
there was a different module available for that set. I think it was called 9-57-VCR but you will have to find someone with the factory bulletins to look it up. Then you have to find one !! There were also mods for 6U10 sets IIRC. Before you go nuts be sure the 330 ohm on the 9-57 is OK, they all went. Change it to a 1 watt if its not. Wont fix it but will improve it. 73 Zeno
|
|
#2
|
||||
|
||||
|
Quote:
http://videokarma.org/showpost.php?p...72&postcount=6 Cheers,
__________________
Brian USN RET 22YRS (Avionics/Cal) CET-Consumer Repair and Avionics ('88) "Capacitor Cosmetologist since '79" When fuses go to work, they quit! |
|
#3
|
||||
|
||||
|
Quote:
19" B&W TV's but I would think it would have had a lower number. I think they predate the color set. BTW Zeniths first 3 SS TV's were B&W's. Do not pass them up ! 1) Royal 1290 the first. 12" very rare, never seen one 2) a hand wired 19" with plug in transistors. Seen a few. 3) a set with duramodules. Seen a few. Maybe in consoles also ?? Any early SS B&W's made in USA are worth getting IMHO. They were a premium set that worked awesome when running right. Remember them from RCA, Syl, Philco, Motorola. Just be careful of rebranded JP sets. 73 Zeno
|
|
#4
|
||||
|
||||
|
Quote:
Cheers
__________________
Brian USN RET 22YRS (Avionics/Cal) CET-Consumer Repair and Avionics ('88) "Capacitor Cosmetologist since '79" When fuses go to work, they quit! |
|
#5
|
||||
|
||||
|
[QUOTE=zeno;3082073
2) a hand wired 19" with plug in transistors. Seen a few. [/QUOTE]I've been looking for one of those for years, and have yet to find one, never even seen one outside of the Sams folders or Zenith service manuals. Anyway, I've been following these threads, I use exactly the same set as my main watcher (25EC58 Zenith in the Avanti cabinet with the remote). I had to replace the tripler when I first got it, and it currently is giving me some weird intermittent problem with white horizontal lines flashing across the screen, but I like it. |
| Audiokarma |
|
#6
|
||||
|
||||
|
Quote:
pick up. I assume you changed all the 22-5001 caps in your Avanti, they can cause some odd problems. Also gotta watch the focus divider, Sometimes when they are going the CRT socket arcs & goes bad. I have seen the dividers turn to a blob & the people still watching it ! 73 Zeno
|
|
#7
|
||||
|
||||
|
Quote:
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650 |
![]() |
| Thread Tools | |
| Display Modes | |
|
|