Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #24  
Old 09-09-2013, 08:37 PM
TinCanAlley's Avatar
TinCanAlley TinCanAlley is offline
VideoKarma Member
 
Join Date: Sep 2008
Location: So Cal, CA
Posts: 1,026
Quote:
Originally Posted by Username1 View Post
2 probes are an option, your scope will get a trigger signal off whatever you apply to one channel, the second probe is just in case you need to use a separate trigger source, good idea to have for some needs. Be sure you get ones with 1x 10x options and trimmer adjustment for capacitance, this will match impedance properly. Your scope has a square wave test point on its front, attach the probe, and adjust the trimmer to get a nice square wave with no overshoot, or loading (rounding of the square edges).
I do have a question about test points. In the Sams it shows a test point between one leg of the vertical transistor and one leg of the horizontal blanking transistor. Seems the two legs are tied together and then a resistor goes to ground from that solder point. Now the test point is right at that junction and it can only be reached from the bottom of the chassis. Is it important to get that point or can I just connect the probe on the top side directly to the leg of the blanker transistor? Either way it's on the same end of the resistor, so that's not an issue. It's just not at the solder point of the two legs.

I hope that makes sense.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL

Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:05 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.