Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #23  
Old 09-09-2013, 07:11 PM
TinCanAlley's Avatar
TinCanAlley TinCanAlley is offline
VideoKarma Member
 
Join Date: Sep 2008
Location: So Cal, CA
Posts: 1,026
Quote:
Originally Posted by Username1 View Post
A 465M is a really good scope, one of my favorites, Calibration certified means you can get your money back if you decide to sell one day. I bet it was expensive, be sure you get the papers. Be sure to get probes so you can use it when you get it.

2 probes are an option, your scope will get a trigger signal off whatever you apply to one channel, the second probe is just in case you need to use a separate trigger source, good idea to have for some needs. Be sure you get ones with 1x 10x options and trimmer adjustment for capacitance, this will match impedance properly. Your scope has a square wave test point on its front, attach the probe, and adjust the trimmer to get a nice square wave with no overshoot, or loading (rounding of the square edges).

Just for the heck of it, when you just set that tv up to run as normal, and wack it a few times does anything happen to either the sound or picture that would indicate any loose connections, since this is a module set, any indication of disturbance while hitting it may mean you have bad plugs, or connectors on the boards....?
I have one 10x probe already (just purchased it a couple of weeks ago) and have order a second one. They do have the trimmer adjustment, so I think all will be good when the scope arrives.

The scope is supposed to come with a calibration certificate. I'll probably keep it afterwards and start scoping anything and everything. I know if I get rid of it, I'll need it.

I guess I can use something to tap around on the chassis and modules to see if there's something loose (think I have a drum stick around somewhere). Whacking the set does no good as it's a solid cabinet and only serves to sting my hand.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL

Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:43 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.