Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #5  
Old 09-05-2013, 10:21 AM
Zenith26kc20's Avatar
Zenith26kc20 Zenith26kc20 is offline
VideoKarma Member
 
Join Date: Apr 2009
Location: New Orleans
Posts: 860
Pincushion diodes and horizontal outputs were a problem on the CRT panasonics as well as power supply electrolytics and IC's.
Also, look around the power relays. Bad connections are a problem there.
While you are in there, look over the caps around the vertical IC and the vertical IC connections. They were problematic.
Can you post a picture of the chassis.
Also, is it the Prism or the TAU set.
The TAU had CRT troubles (went gassy quick) and power supply intermittants that was connections all over the circuit board.
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:32 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.