Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Vintage TV & Radio Tech Forum

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #2  
Old 09-04-2013, 04:02 PM
N2IXK's Avatar
N2IXK N2IXK is offline
Technohippie
 
Join Date: Apr 2011
Location: Sittin' on the "Group W" bench...
Posts: 817
Presumably for the same reasons that tubes of the same type from different manufacturers often look somewhat different inside. Manufacturers tries to reuse as many parts as they could between different tubes, to limit the amount of tooling needed to roll out a new type. The same plate structure might be used in several different sweep tubes, and if the getter mounting tap is already available for welding to the side rather than the top, that's where it ends up.

Quote:
Originally Posted by Charlie View Post
Curious- with many tubes of the same type, getters can be in different locations. For instance, some 6JE6's have them at the top of the tube, and others are on the sides.

I would think different tube numbers are engineered to place them in the best possible position, but why put them in different places in two tubes of the same type?
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:15 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.