![]() |
|
|
|
#1
|
|||
|
|||
|
CTC-10E first pix
Bars but no color. Initial purity awfull but a quick degauss and rough purity set and we have a good red field. I replaced the focus rectifier and HV rect. to get this much of an image but the raster still wants to bloom quite badly at high brightness. Ill be checking the CRT scocket voltages next and checking tubes.
|
|
#2
|
|||
|
|||
|
remote control or mechanized madness
Took a break from recaping and looked over the remote control. The channel motor was very weak and I suspect the N.P. Run Cap. As it turns out the same motor operates the volume, tint and color controls. Everthigs geard together and what I thought was a motor on the schematic is actualy a clutch. This is going to be fun if its more than a run cap. I have a remote transmitter but it puts out nothing if powered w 4 volts.
This whole setup looks like a slot machine. |
![]() |
| Thread Tools | |
| Display Modes | |
|
|