![]() |
|
|
|
#1
|
|||
|
|||
|
Very good, I see the shaft now. I removed the plate but didn,t remember seeing a little knob attached. Its silver colored unlike the others and was hiding in the bag withe the rest of the stuff.
Simmilar to the RCA's of the mid 60s, it seems, to make it skip channels. Its great to have the factory info. Sams as good as they were in a broad brush kind of way, didn't get the details that could only be gleaned from mfr specific publications. Thanks ADAM ! |
|
#2
|
|||
|
|||
|
TVCOLLECTOR is a very lucky guy indeed. I slid the chassis out just enough to get to the missing thermistor and this set appears to be very clean. No smoke or dust on the HV wires even. Very little dust inside. This set has been parked in a clean undisturbed environment for a LONG time.
This is by far the oldest chassis Ive worked on for a long time. I once owned a CTC something in H.S. with a 21axp22 in it. The top of the cabinet could come off to do setups. I remember at the time wondering why it looked better than the "new sets" at sears. We all know now. |
|
#3
|
|||
|
|||
|
CTC-10E first pix
Bars but no color. Initial purity awfull but a quick degauss and rough purity set and we have a good red field. I replaced the focus rectifier and HV rect. to get this much of an image but the raster still wants to bloom quite badly at high brightness. Ill be checking the CRT scocket voltages next and checking tubes.
|
|
#4
|
|||
|
|||
|
remote control or mechanized madness
Took a break from recaping and looked over the remote control. The channel motor was very weak and I suspect the N.P. Run Cap. As it turns out the same motor operates the volume, tint and color controls. Everthigs geard together and what I thought was a motor on the schematic is actualy a clutch. This is going to be fun if its more than a run cap. I have a remote transmitter but it puts out nothing if powered w 4 volts.
This whole setup looks like a slot machine. |
![]() |
| Thread Tools | |
| Display Modes | |
|
|