Quote:
Originally Posted by zeno
Photofact doesnt list common carbon resistors. You may be able to
find an old resistor kit or someones old resistor box. For new ones
just use the newer flameproof ones. Smaller & more reliable.
Only other caution on resistors is DO NOT replace carbons with
wire wounds. You are putting a coil in the circuit & it can
really throw off some circuits.
73 Zeno  |
I've been looking at metal film. Are these okay? They're film and not wire wound.
If I can find the values by the stripes, how do I figure out the wattage? I figure I'll play it safe and get 1w for all unknown. I figured that the wattage was like the voltage on caps. You can go up, but not down. I also ordered all 5% as I figured it would vary less than a 10% and this wouldn't affect the circuit.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|
08-15-2013, 11:06 AM
Hybrid Mode
