![]() |
|
#2
|
||||
|
||||
|
All the transistors with different part ##'s are different. When you sub them you are getting same or better specs. Works MOST the time.
Also case style & pin out must be watched. OEM transistors are selected closer to the needed specs to save $$ and best match the design. Most the time they make an " opposite sex" twin. They show up in audio & vert outputs on TV's sometimes. your TV uses none of the pairs as pairs. Some places you should only use OEM transistors. Horz output, IF & tuners, sometimes vert & audio out, power supply regulators. Very brand specific as to where you can get away with subs. Sometimes OEM's cost less. If you get a common failure you may stock the OEM instead of going to the subs. 73 Zeno
|
| Thread Tools | |
| Display Modes | |
|
|