Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 08-12-2013, 07:26 PM
Eric H's Avatar
Eric H Eric H is offline
Administrator
 
Join Date: Jun 2002
Location: So. Calif
Posts: 11,565
That is the right thing to be adjusting, not sure why it's not responding but basically it has to mean the yoke isn't turning with it as it should.

As earlyfilm suggested you could watch that red wire visible through the gap and see if it moves. You could even poke something non conductive through there and give it a poke and see if it's loose or not, very gently though.

The last resort is to remove the focus and centering assembly off the back and see what's wrong, that's a royal pain though.

Two words of caution, do not take the focus assembly apart, that is don't remove the screws holding the magnets together, once apart it may never work right again.
Second is those cloth straps will be rotted, on mine just the slightest sideways tug was all it took to rip one completely off.

This picture may help you see what you are dealing with, the slotted metal bracket is, as far as I know, attached to the core of the yoke so if it turns the yoke should also turn. I suppose it might be possible for it to break loose somehow.
Attached Images
File Type: jpg yoke.jpg (59.1 KB, 27 views)
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:05 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.