Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Vintage TV & Radio Tech Forum

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #15  
Old 08-10-2013, 12:55 AM
Winky Dink's Avatar
Winky Dink Winky Dink is offline
VideoKarma Member
 
Join Date: Apr 2010
Location: Meridian, Idaho.
Posts: 583
I don't know enough to scratch my head.

Sorry I can't add much to this discussion, but it's way over my head. I spent some time checking the pin 5 voltage. With no connection to the audio source, we get 0 to -.8V.
When I plug in the earphone jack with the audio power off, we get -5V. With the power on, we get +5V. If I leave the meter on pin 5, the + or - 5V bleeds down, losing about 1V per minute. I put in a spare 117L7 and got the same results.

Tried tuning the coil with a 4-ft antenna set up 15 ft from the receiver, but received nothing at 900 KHz. I have a couple of table radios with loop antennas, but they're too noisy between stations. So, If the radio won't come to the transmitter, then the transmitter will go to the radio.



Alas, this didn't work either. We're being visited by our grandsons for the next couple of weeks, so I won't have much time to play with this. On the other hand, at 7 and 10 years old, they're both a lot smarter than me, so maybe they can figure it out.
__________________
Winky Dink
Damn the patina,
Full speed ahead!
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:28 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.