Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Vintage TV & Radio Tech Forum

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #10  
Old 08-09-2013, 07:55 PM
bob91343 bob91343 is offline
VideoKarma Member
 
Join Date: Nov 2010
Posts: 745
Pin 5 on the tube is the screen grid. It shouldn't be such a low voltage; I think 100V or so would be better. I am not looking at the tube data so perhaps I am in error.

In order to get plate current in a normal pentode, the screen voltage needs to be positive, not as high as the plate. If you increase the screen voltage by a series resistor to B+, be sure to decouple the audio from the pot with a coupling capacitor. And bypass the screen for RF with perhaps a 220 pF capacitor.
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:31 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.