Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #2  
Old 08-07-2013, 05:30 PM
zeno's Avatar
zeno zeno is offline
VideoKarma Member
 
Join Date: Mar 2013
Location: New Hampshire
Posts: 4,918
First the line on the side. Your set is old & the electrolytics
are probably not up to snuff & the power supply is a tad low.
You can look for any of the following to improve it, you
set may or may not have them. Hoz centering, width,
also if you tweak the hoz hold it may help.

The other problem is also probably electrolytics.
To improve try vert size, vert lin, & vert centering.
The controls will interact so go back & forth to get
the best geometry.

Eventually you will have to track down the cause. A total
"recap" is foolish but fresh caps in the vert & power supply
may take care of all. Must haves are a good meter, a manual
& basic tools of course. A Variac is also a nice to have but
not a must have...........

73 Zeno
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:13 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.