Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 07-24-2013, 05:55 PM
zeno's Avatar
zeno zeno is offline
VideoKarma Member
 
Join Date: Mar 2013
Location: New Hampshire
Posts: 4,918
Quote:
Originally Posted by radiotvnut View Post
Speaking of the PC chassis, I need my memory refreshed. I know you all remember the older GE 19" color TV's where the whole cabinet basically lifted off to make it easier to access the chassis and there was a big metal frame that held everything together. They started this with tube TV's and were still doing it on the EC solid state TV's. When I was about 12-13, someone gave me a 19" GE solid state set with this type of cabinet arrangement; but, I seem to recall it having a single board chassis. Could this have been an early PC chassis TV? If not a PC; then, what was it? Or, am I totally wrong about the set I had being a single board chassis? All the other PC's that I've had used the more modern style cabinet where only the actual back cover lifted off.

Oh, and I hated to see those Panasonic built GE's. Those sets seemed to always have bad flyback's, bad CRT's, and very poor soldering. I recall the "BC" chassis that was used in 13" and 17" sets. The tuner control modules looked GE'ish; but, the chassis looked like a Panasonic OEM chassis and every one of them that I've worked on had a torched flyback. Then, there were the 25" sets that were Panasonic all the way and used the TLF14423 flyback. I didn't care for those, either. There was also an "MK-II" chassis 19" set that was a Matsushita and there was an orange disc cap in the HOT collector circuit that would burn and take the HOT with it. I've also seen a few GoldStar-built 13" GE TV's and GE's later 12" B&W post-XB chassis TV's were either Samsung or GoldStar.

IMHO, the best color GE was the PC and the best B&W GE's were the 12" and 15" "XB" and the 19" and 22" "XA" chassis.

I've got an '87 GE 19" knob-tuned color TV that uses the CTC136; but, that was after GE got out of the TV business and was kicking out rebadged RCA's. Wasn't '86 the last year for the PC chassis?
Wow I dont remember that chassis. Some tube jobs had a bottom
plate attached to the back like portacolors. Others came out separate
like the C-2 18/19" dog. There was the portacolor 2 solid state
also used in 19" ( JA chassis ?). Had a vert module & every one the safety cap opened taking the HOT ( EP15X48 ?) & sometimes FBT, & vert board. Yokes also went. Thing I remember abt the import GE's was them
locking up & it had a reset button inside like later Emerson crap.
Also the cap & FBT as well.
PC chassis was one board, the old style HOT on a metal
part on the R. FBT was white with tastefully done paint
splotches. All mounted on a frame that you could pull it back
& remount in a service poss. Tuners usually conventional but
the electronic ones had griplets.
IIRC PM chassis was a PC with a switching supply & maybe
pin, comb & VIR cks. Prob. only in consoles. Not many seen.
And yes the PC was a POS. For the PC, AA,AB,AC I hung
a sheet on the wall showing which points to hard wire.
Still remember W34A,B &C on the AA..........

Been fun enuf fer now
73 Zeno
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:06 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.