Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Vintage TV & Radio Tech Forum

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 07-24-2013, 03:56 PM
bob91343 bob91343 is offline
VideoKarma Member
 
Join Date: Nov 2010
Posts: 745
The drift is probably temperature related. Maybe more cabinet ventilation for starters anyway. Is the drift always in the same direction? Does it abate after a while?

You can try putting in some negative temperature coefficient capacitors in the oscillator circuit. Sometimes there will be a bad solder joint, lousing up the oscillator tank Q.

You could get fancy and install a temperature control circuit.
Reply With Quote
  #2  
Old 07-24-2013, 06:47 PM
zeno's Avatar
zeno zeno is offline
VideoKarma Member
 
Join Date: Mar 2013
Location: New Hampshire
Posts: 4,918
Quote:
Originally Posted by bob91343 View Post
The drift is probably temperature related. Maybe more cabinet ventilation for starters anyway. Is the drift always in the same direction? Does it abate after a while?
You can try putting in some negative temperature coefficient capacitors in the oscillator circuit. Sometimes there will be a bad solder joint, lousing up the oscillator tank Q.
You could get fancy and install a temperature control circuit.
Heat related yes, also have to consider line voltage. Seen multi
band radios that worked but when the line dropped the osc
would quit at hi freqs. IIRC Zenith TO's would do this, bad osc
tube that checks good. Bad cons can be eliminated, this is 100%
hand wired. BUT dirty tube sockets are a strong possibility.
As I said drift is a bit vague, I assume freq. drift. The set does
have AFC & if its freq drift its pretty bad...... The other thing
that comes to mind is we did replace IF cans in these,
they would crackle then crap out.

73 Zeno
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:42 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.