Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 07-19-2013, 09:38 PM
old_tv_nut's Avatar
old_tv_nut old_tv_nut is offline
See yourself on Color TV!
 
Join Date: Jul 2004
Location: Rancho Sahuarita
Posts: 7,814
Quote:
Originally Posted by Username1 View Post
Turning the color up high is not the way to do purity. Any noise will energize the other guns to want to fire, like color noise, bad idea.

You disable any signal, like setting the tuner between stations so the screen is white, no snow. turn color off. (The 2 drives set at mid-point if after doing gray scale once, you find the tube does not track well through brightness range using the untouched drive settings.) Then turn the screens down except for the one you are adjusting, adjust brightness control, turn contrast down all the way. Make your adjustment at a mid to lower brightness, then turn that one off, do the next color. When all purity is done, set the gray scale, then adjust the drives if needed as you check the gray scale as you change brightness.

This is the way I was taught in tv repair school, purity is done with no signal applied. Screen is white, no snow, tuner is between channels, brightness turned down to cutoff, and each gun turned down to cutoff, no retrace lines on any color should appear while making gray scale adjustments. The brightness range should have cutoff, but no retrace on full brightness.
We were talking about using pure color field from a DVD - no snow.
Secondly, if you are viewing a pure color field signal, turning up the color causes two guns to go into cutoff, so even if there were some snow, it would only be visible in one gun. The other two would still be cutoff, and therefore the purity adjustment would work just fine.

The technique you describe is a method to use when you don't have a test signal.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:53 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.