Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #26  
Old 07-17-2013, 12:00 AM
dtvmcdonald's Avatar
dtvmcdonald dtvmcdonald is offline
VideoKarma Member
 
Join Date: Nov 2012
Posts: 1,268
Argggh

Today I recapped and partially reresistored the horizontal section,
the video output, and the DC restorer. This is a
delicate job due to some close fitting huge capacitors.

When I turned it on it still worked but the picture
was weak and noisy. But even with the contrast (actually
RF-IF gain) all the way up the sync still worked. 45 minutes
of probing later I found the problem: somehow the
RF terminals had broken wires: one lead from the balun
was broken, and the other lead from the TV to the terminal
strip was broken, thus only probably 0.2pF of capacitive coupling.
Fixing this resulted in a stable and quite nice picture.

The vertical centering is all the way to one side and
the linearity is bad. The vertical circuit is odd: its
a hybrid of the Sams and Riders schematics, and
'I'm pretty sure that is the problem, perhaps both problems.

Doug McDonald

Last edited by dtvmcdonald; 07-17-2013 at 12:03 AM.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:54 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.