Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #13  
Old 07-16-2013, 11:07 AM
kx250rider's Avatar
kx250rider kx250rider is offline
REAL TVs have TUBES!
 
Join Date: Oct 2005
Location: Los Angeles & Dallas
Posts: 3,239
Quote:
Originally Posted by kramden66 View Post
In this set the electrolytics are 475 volts , i have a feeling that a 450 volt would be ok its just the start up voltage may go at or above 450 volts and then drop thats why they have 475 volt caps in there , i could always order 500 volt caps but just for testing and getting the set up and running i was going to double the caps using two 450 volt caps making it 900 volts handling , so that would be way over whats needed but the caps would be ok .
the dumont ra-103 , ra-103D and ra-110 all use a couple capacitors in series with 100k resistors on them , designers put that in to avoid a higher voltage capacitor.

mike
Or what I've done in certain cases with fast-warming B+ rectifier tubes or solid state B+ supplies, is to modify the B+ supply to include a delay relay, so as the filaments are all up before the B+ comes on. That shortens the duration (or eliminates) the unloaded high B+ surge on startup.

Charles
__________________
Collecting & restoring TVs in Los Angeles since age 10
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:13 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.