Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #8  
Old 07-13-2013, 04:59 PM
marty59's Avatar
marty59 marty59 is offline
VideoKarma Member
 
Join Date: May 2008
Location: Arlington, Tx
Posts: 915
Quote:
Originally Posted by timmy View Post
well i put a new flyback in as the old one turned into a candle, wax... the hv rec tube socket may be bad.
I would imagine that the socket was inspected while you were replacing the flyback. However, any sharp points/lead dress are important here as well as checking for carbon tracks too. If there are any unused pins you may be able to remove those too. As for the cup, clean as mentioned and inspect for any (carbon) pinholes in it. You could coat the floor of that cup with some liquid-ey windshield silicone and let it set up too.

Even as an easy check you could unscrew the rectifier socket and "carefully" position it away from the cup just a little and see if that makes any difference.

Just shooting some ideas here.......
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:04 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.