![]() |
|
|
|
#1
|
||||
|
||||
|
Find an old CRT computer monitor or PC power supply. They usually have line chokes. two windings on one core. They don't look like peanuts but do the same function, namely blocking high frequency crud getting in or out of the set. Salvage one and use it, just be sure you don't short across the line with it. The inductance value is not critical. If you're getting full line voltage thru your existing coil, I wouldn't worry about it.
__________________
|
|
#2
|
||||
|
||||
|
Quote:
|
|
#3
|
||||
|
||||
|
yes, it is a dual winding line choke. Some are not encapsulated like that one. Most sets use that to keep interference from their switch mode power supplies from getting into the line and to prevent (somewhat) noise from entering the set from the line. There is also a capacitor after the choke.
|
|
#4
|
||||
|
||||
|
Quote:
Now this just arrrived in the mail http://www.ebay.com/itm/290718131729...84.m1439.l2649 is there a difference betweeen a line choke and a rf choke? Thanks for all the answers |
![]() |
| Thread Tools | |
| Display Modes | |
|
|