Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #16  
Old 05-12-2013, 04:28 PM
zeno's Avatar
zeno zeno is offline
VideoKarma Member
 
Join Date: Mar 2013
Location: New Hampshire
Posts: 4,918
A few ideas.
1) the yellow cap I remember now. I think they burned due to cold solder
joint. Change it anyways IF you can find an original. When they burned
you often had to cut away a lot of PCB
2)smear. I saw a little retrace. Check 200V for video outs.
Open 'lytic causes that & usually shading ( darker on L of screen )
excessive brightness, retrace. Common on ALL solid state sets.
A $$ maker.........
3) SAW filter may be bad. On regular pix looks like fine tuning is off.
Hard to describe but its like porn, I know it when I see it.
4) back to backing. Works good BUT its the only thing that almost killed me.
Did it with a pair of tin-can Zeniths. Leaned on both of them &
next thing I knew I was on the floor shaking, sweating bullets &
had atrial fribulations. Like any experienced TV man I got a case of Bud
& quickly recovered. NEVER did that again !

Keep us posted
73 Zeno
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:43 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.