Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 04-03-2013, 09:04 AM
Kamakiri's Avatar
Kamakiri Kamakiri is offline
Administrator
 
Join Date: Jun 2002
Location: Buffalo, New York
Posts: 5,109
To me, the actual theory behind operation, etc, came last. Contrary to popular opinion, you don't need to go back to Ohm's Law and study circuit design to be able to repair a television, in most cases. Most often times, the repair of a set involves a simple flow chart that you can develop yourself in your mind, and the tenacity to get beyond the one most popular statement you'll say to yourself over and over and over, every time you start to fix one.

Replace this statement:

"Oh, #$@&. I REALLY don't want to do this part. I wish I could leave this part up to someone else who can do this a lot easier than I will. I'll probably screw it up royally"

With this one:

"Well, I guess ain't nobody gonna do this, so if I want it done,, I'm gonna have to try.....I'll just be as cautious and careful as I can doing it. I'll learn about it step by step as I go through it, and ask questions if I have any."

Repair books are great for diagnosing and repairing certain conditions, but they don't anticipate multiple system failures all at once....and you will most certainly be facing exactly that. I have one book that is titled "Television Repair in 15 Minutes". Yeah, B....S.....!

Remember, we're dealing with electronics that are over 40 years old. Repair books were made for sets that were relatively new, or newer than what they are now anyway....rendering them useless unless you've already done a considerable amount of component replacement to begin with.
__________________
"Restoring a tube TV is like going to war. A color one is like a land war in Asia."
Reply With Quote
  #2  
Old 04-13-2013, 09:07 AM
zenithfan1's Avatar
zenithfan1 zenithfan1 is offline
Mark
 
Join Date: Jan 2008
Location: Kenosha, Wisconsin
Posts: 4,211
Quote:
Originally Posted by Kamakiri View Post
To me, the actual theory behind operation, etc, came last. Contrary to popular opinion, you don't need to go back to Ohm's Law and study circuit design to be able to repair a television, in most cases. Most often times, the repair of a set involves a simple flow chart that you can develop yourself in your mind, and the tenacity to get beyond the one most popular statement you'll say to yourself over and over and over, every time you start to fix one.

Replace this statement:

"Oh, #$@&. I REALLY don't want to do this part. I wish I could leave this part up to someone else who can do this a lot easier than I will. I'll probably screw it up royally"

With this one:

"Well, I guess ain't nobody gonna do this, so if I want it done,, I'm gonna have to try.....I'll just be as cautious and careful as I can doing it. I'll learn about it step by step as I go through it, and ask questions if I have any."

Repair books are great for diagnosing and repairing certain conditions, but they don't anticipate multiple system failures all at once....and you will most certainly be facing exactly that. I have one book that is titled "Television Repair in 15 Minutes". Yeah, B....S.....!

Remember, we're dealing with electronics that are over 40 years old. Repair books were made for sets that were relatively new, or newer than what they are now anyway....rendering them useless unless you've already done a considerable amount of component replacement to begin with.
This is the main way that I learned. If I wanted 'em working, I was the only doofus standing there so I had no choice. I also used many of the books and methods mentioned by the others. I think it would be really difficult to cram as much info that would be necessary to do restoration work into a 45 min presentation. Take your time and check your work carefully, ask questions ect and I think you'll be fine. One step at a time and it won't seem overwhelming at all.
__________________
My TV page and YouTube channel
Kyocera R-661, Yamaha RX-V2200
National Panasonic SA-5800
Sansui 1000a, 1000, SAX-200, 5050, 9090DB, 881, SR-636, SC-3000, AT-20
Pioneer SX-939, ER-420, SM-B201
Motorola SK77W-2Z tube console
McIntosh MC2205, C26
Reply With Quote
  #3  
Old 04-27-2013, 09:55 PM
Findm-Keepm's Avatar
Findm-Keepm Findm-Keepm is offline
Followin' the Rules...
 
Join Date: Jun 2007
Posts: 2,857
I'm surprised no one has mentioned the fine folks already here - Bob Andersen and Phil Nelson. I caroused/worked in a TV shop as a kid, but still learn stuff from those two. Phil's website is top-notch, and he documents his stuff superbly. Bob's restorations (Early B/W sets, mostly) are an adventure, with tips, techniques and the occasional pitfall all out there for you.

With the multitude of talent in the other VK members, remember to always ask if you don't know - no questions are stoopid questions here - just friendly folks all wanting to help you succeed.

And if all else fails:

http://videokarma.org/showpost.php?p...94&postcount=1

Cheers,
__________________
Brian
USN RET 22YRS (Avionics/Cal)
CET-Consumer Repair and Avionics ('88)
"Capacitor Cosmetologist since '79"

When fuses go to work, they quit!
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:58 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.