|
|
|
#9
03-13-2013, 03:24 PM
|
|||
|
|||
|
Hi All;
I used the Variac and took it up to 140 Volts and used the 300 Volt tie point right before the choke and used that connection to temporarily shorted pins 1 and 5 and 6 of the Socket for the 1st Video Tube a 6AU6, with everything disconnected from those pins except for the socket.. It seemed fine, no sparks, nor anything, so I think there are no shorts to those pins, especially to ground.. Now to put it all back together.. THANK YOU Marty 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode