|
On the few Predictas I have replaced flybacks on, the replacement part consists of only the windings and HV 'tire' with tinned wires sticking out. You have to re-use the powdered iron core, 'C' clamp, and terminal board. AND you have to be super careful to replace the two thin fiber spacers between the core halves, as these determine the resonant point of the transformer.
These were Philco direct replacements, but i've read that the whole transformer could also be obtained from other supplyers (maybe like Triad, Thordarson et al.).
|
03-11-2013, 01:24 PM
Hybrid Mode
