Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Vintage TV & Radio Tech Forum

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 02-11-2013, 10:34 AM
vts1134's Avatar
vts1134 vts1134 is offline
Looking For Time
 
Join Date: Apr 2011
Location: Pittsburgh, PA
Posts: 1,534
Quote:
Originally Posted by old_coot88 View Post
Yikes! NO, nein, nyet! Not until alignment is absolutely determined to be the cause of the problem. Undertaking a video IF alignment requires a sweep generator and scope, and a thorough understanding of the procedure.
Relax, I don't do alignments on my own . I am not yet at that level of skill and I know it. There is a local shop that I take the set to and he walks me through every step of the way. The last set I did I wouldn't have thought it needed alignment, but I was shocked how much better the picture looked afterwards. The alignment will be the last step on this set. I have to have everything else nailed down tight first.

Quote:
Originally Posted by Eric H View Post
It has a loose connection somewhere, possibly in that repaired Ion Trap.
It could also be a flaky connection at a tube socket.
You need to start poking around with a wood or plastic stick and see if you can isolate it.

Bad Mica caps in the sweep circuit are also a possibility but I wouldn't think tapping would affect them much.
I'll get tapping as soon as I can .

Quote:
Originally Posted by old_coot88 View Post
From your account and from the video, the first thought is a H-K (heater-cathode) short in the CRT. Does the CRT heater have a dedicated 'floating' 6V winding, or does it run off the main heater supply?
It runs from the main heater supply. One thing I don't quite understand is the schematic looks like the heater and cathode are tied together. Wouldn't that would mean the heater and cathode are constantly shorted? What am I missing?

Reply With Quote
  #2  
Old 02-11-2013, 10:58 AM
old_coot88 old_coot88 is offline
VideoKarma Member
 
Join Date: Sep 2009
Posts: 2,654
Quote:
Originally Posted by vts1134 View Post
..It runs from the main heater supply. One thing I don't quite understand is the schematic looks like the heater and cathode are tied together. Wouldn't that would mean the heater and cathode are constantly shorted?
Right you are, amigo. That precludes an H-K short. That's why i wanted to see the schematic. In later designs, video was fed to the CRT via the cathode; whereas in your set, it's fed via the grid, with the cathode grounded.
So the mystery deepens.

Other than the CRT, do other parts of the chassis show sensitivity to probing/tapping?

If the CRT remains the prime suspect, it might be an open/intermittent G2 (grid 2).
Reply With Quote
  #3  
Old 02-11-2013, 11:18 AM
Geist Geist is offline
VideoKarma Member
 
Join Date: Dec 2012
Posts: 350
Hi All;
VTS1134, It also could be that the CRT leads need to be resoldered and or checked for good connection or wiring breaks.. Check out Bob Andersen's site for how to check out possible crt connection problems and reflowing of crt connections..
THANK YOU Marty
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:59 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.