![]() |
|
|
|
#1
|
||||
|
||||
|
Before replacing caps, I usually do some preliminary inspection, cleanup, and tube testing/cleaning:
http://www.antiqueradio.org/FirstStepsInRestoration.htm The following page lists articles about restoring various old B/W sets. None of them is exactly like yours, but if you skim a couple of the B/W articles, that should give you an idea what's usually involved in getting an old TV to work reliably: http://www.antiqueradio.org/restoration.htm Some plastic flaking off a coil doesn't seem like a big problem. If you have never restored a tube radio or TV before, consider practicing on a simple tube radio before tackling a TV. Phil Nelson Phil's Old Radios http://antiqueradio.org/index.html |
|
#2
|
|||
|
|||
|
Funny you mention starting with an antique radio, Phil. The same couple also gave me an old RCA 9-X-571 radio that's not working.
Sorry about the earlier duplicate post, everyone - not sure how that happened. I hit the back button a couple times after the first post and somehow ended up with a duplicate. |
|
#3
|
||||
|
||||
|
The 9-X-571 is a much more appropriate beginner's project. This article has advice about recapping:
http://antiqueradio.org/recap.htm Phil Nelson |
|
#4
|
||||
|
||||
|
Hey Neil, glad to hear you got yourselves and the set back home safe and sound. Sure was not the nicest weakend for TV retrieval.
Hard to tell from the photo where that black plastic came from. Take your time and try to resist jumping into the TV restoration too fast. Good idea to tackle the radio first. Do you have any experience working on any type of electronics? Hopefully you have a digital or analog multi-meter for taking voltage and resistance measurements? |
|
#5
|
|||
|
|||
|
Hi Kevin - back in the day when I was working for General Dynamics, I wired up prototype field replaceable units for the F-16. Something the old-timers there taught me was that all electronic devices run on smoke, and that if you let the smoke out, the device will cease to operate... LOL! Since then I've soldered up this and that over the years. One of the other companies I worked for was having a trivia contest one year and the grand prize was a trip somewhere, can't remember where to. Anyway we needed a device with a button for each of two contestants so whoever hit their button first when they thought they had the answer would lock out the other contestant and trigger a light on either side indicating who was first. Then you could hit a button to reset the system and clear the lights, ready for the next question. Wired that all up from scratch and it worked well - I think I may still have that thing down in the basement somewhere. I'd be hard pressed to tell you how I did it now, that was a long time ago. So the short answer is yes, I've been around electricky stuff over the years, and I do own a multimeter.
I've had better trips for sure. As I mentioned, driving the last 200 miles from Des Moines to Rochester Saturday night we had blowing snow and I could see barely see the lines on the road and only maybe three or four cars ahead at times. Being from Arkansas, I figured I'd do as the Romans do and go with the flow, but folks were still driving 60 - 70 mph. All I could think of was this is how pile ups happen, but what do I know. Folks up there are seasoned veterans when it comes to driving in the snow, I reckon:-) We spent the night, picked up the TV Sunday morning, and then it was smooth sailing heading back in the daylight, thank goodness! |
| Audiokarma |
|
#6
|
|||
|
|||
|
That was probably the TOTL 21" model that year.
I see it uses the 6V6GT audio output tube. That model doesn't use the audio output as a voltage devider. I also see that the CRT was replaced with a Sylvania. A better chance of it being good. The plastic crumbs are probably from the yoke.
|
|
#7
|
||||
|
||||
|
Quote:
|
|
#8
|
||||
|
||||
|
Quote:
Anyhow, there's plenty of very talented folks hanging around this site that are very willing to help you with any questions. |
|
#9
|
|||
|
|||
|
Thanks to Kevin, Phil and Dieseljeep. I've got the radio all pulled apart and cleaned, for the most part. Had to replace the crumbling power cord, of course - what a pain in the rear THAT was. I've got a listing of the caps it needs, so I'll be working on that for a while I imagine.
Also working on putting a dim bulb tester together per your suggestion, Phil, as I have no idea what that radio is going to do once it's plugged up. I'm excited about finally getting some hands on experience! One question - is any of that gooie, sticky mess inside these old units toxic or anything like that? Any precautions needed in that area? Thanks! |
![]() |
| Thread Tools | |
| Display Modes | |
|
|