Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 02-03-2013, 08:20 PM
init4fun's Avatar
init4fun init4fun is offline
VideoKarma Member
 
Join Date: Mar 2011
Posts: 1,210
To do this as a fun experiment to see which caps could be revived , sure , I understand the "I wonder if I can" all too well . But , for any kind of continued longevity I gotta agree with Phil and Sandy and anyone else who said it ain't worth the long term risk of leavin em in there . New caps got 60 odd years in their favor as to running mortality .

If ya don't change em out , best not to leave the room while it's playing .....
Reply With Quote
  #2  
Old 02-03-2013, 10:11 PM
Penthode's Avatar
Penthode Penthode is offline
VideoKarma Member
 
Join Date: Jun 2009
Location: Kitchener/Waterloo Ontario Canada
Posts: 1,463
I have repaired many old radio and television sets since the late sixties. I have generally found no problem reforming and repurposing old electrolytics. Paper capacitors leak and carbon resistors drift and need to be replaced but the electrolytics, especially the excellent Sprague and Mallory electrolytics from the 40's and 50's seem fine.

Most importantly, you can easily determine if the electrolytic will fail after reforming: simply bench test the set for a few hours and check if they get warm. I find that in 99% of successful reformings I have no problem.

I had my 16" 1949 RCA TV on this weekend for about six hours. It has probably run a couple of hundred hours and one section of a multisection capacitor opened. I replaced it with a NOS unit dated 1965 and the set runs excellently. Apart from that, all the rest of the electrolytics are original. And my 1948 RCA (my first set I acquired in 1969) has all original electrolytics and I have probably put a good thousand hours on that set over the years.

Last edited by Penthode; 02-03-2013 at 10:19 PM.
Reply With Quote
  #3  
Old 02-04-2013, 01:30 PM
Phil Nelson's Avatar
Phil Nelson Phil Nelson is offline
VideoKarma Member
 
Join Date: Jan 2006
Posts: 4,030
Quote:
Originally Posted by Penthode View Post
And my 1948 RCA (my first set I acquired in 1969) has all original electrolytics and I have probably put a good thousand hours on that set over the years.
That's an interesting case, because one of my other superstitions about electrolytics is that they stay healthier when a set is used, rather than sitting idle for decades. In 1969, those caps were only 21 years old, and the set was presumably used during some of those preceding 21 years, so it hadn't been out of service for a super long time. Perhaps playing your TV periodically during the subsequent 44 years has helped those old caps beat the odds.

Phil Nelson
Reply With Quote
  #4  
Old 02-04-2013, 03:14 PM
Penthode's Avatar
Penthode Penthode is offline
VideoKarma Member
 
Join Date: Jun 2009
Location: Kitchener/Waterloo Ontario Canada
Posts: 1,463
I too have been curious about the constant running of a set through its life and the effect on capacitor life.

When I got the set in 1969 and powered it up, I obviously then did not think of electrolytic capacitor age as a problem. The paper capacitors have over the years almost all have been replaced. But the electrolytics remain okay. (Funny, in 1969, a 21 year old 10" set looked really old: it is hard to recocile that a further 44 years has intervened).

My 1949 16" set with a KCS29 chassis, I got two years ago. The children of the original owner said it was retired to the basement in the early sixties and was not used. In fact it was only on the death of the parent and clearing out of the house that the set was uncovered. They said it must have sat unused for at least 45 years. Yet, apart from one section which opened up, the electrolytics recoved the capacitance and do not leak excessively (all electrolytics leak current).

One thing I have noticed for sure is if there is any sign of electrolyte leakage around a terminal or the capacitor seal, the capacitor must be replaced.

Last edited by Penthode; 02-04-2013 at 03:18 PM.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:49 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.