Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 02-01-2013, 03:38 PM
DaveWM DaveWM is offline
VideoKarma Member
 
Join Date: Feb 2009
Location: Orlando FL
Posts: 5,607
while futzing with it I noticed the green was a bit weak, after screwing with drive controls, I finally decided to check tubes. Normally if they test a bit low on my mercury tube tester I don't sweat it, and one of them was a bit low. swapped in and color looks a lot better. per my tester SHB 3000, was about 1500, new tube was 2000 for what ever that is worth.

another odd thing was when I tried to use my vector scope the pattern was a mess on color bars. found out that if i disconnected the grid leads (so the vectorscope was not ready the chroma) the color bars on the screen look good, with in connected it was a disaster. I have never had a problem with the vector scope loading down the signal like that before.

oh the tubes where the 12BH7 difference amp tubes.

Last edited by DaveWM; 02-01-2013 at 03:59 PM.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:51 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.