Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #10  
Old 01-29-2013, 02:44 PM
DaveWM DaveWM is offline
VideoKarma Member
 
Join Date: Feb 2009
Location: Orlando FL
Posts: 5,607
while fussing with it I decided to check the voltage at the horz out fuse, was around 12v IIRC, now its more like 7.5 right on the money per the schematic



during the intial setup I checked the blue screen purity (after getting the red as good as I could) the green was good but the blue was TERRIBLE.. I tried turning up the drive which helped but it was not just weak but more blue/green.

during a prelime setup of the center convergence I noticed the blue was way out, so I tweeked the blue lateraly, bingo blue not only converged but overall was much brighter. seems the blue lateral must have been causing the really bad purity also.

all this is just me messing about, I know I need to do a proper setup using the instructions which are a lot more complicated than what I have seen in other later roundies with later convergence boards.
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:34 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.