Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 01-25-2013, 11:49 AM
miniman82's Avatar
miniman82 miniman82 is offline
First Light: 1952-2011
 
Join Date: Jun 2009
Location: Great Mills, MD
Posts: 4,183
Quote:
Originally Posted by Penthode View Post
I think a few minor modifications to the sweep circuitry may be all that is required.
Like what? I already tried more drive, and removing the regulator tube completely. If I had to guess, it comes down to the flyback and how it's wound. If that's not it, there are still a few things to try. My 5N uses 5U4 vacuum tube rectifiers, swapping to solid state diodes to boost the B+ may help. I think the early CTC-7's were the last ones to use vacuum tubes for LV rectifiers, the rest had silicon. Might also try a solid state HV rectifier for more efficiency, but I hear they can cause issues like lines in the image on screen/video noise.

Quote:
I do not like the static convergence DC supply coming from the horizontal output cathode.
Not sure where else the convergence voltage could come from, you need it from the horizontal for the waveforms. Maybe a tap from the flyback would be a better choice, then the cathode could be more normal with just a resistor.
__________________
Evolution...
Reply With Quote
  #2  
Old 01-26-2013, 12:19 AM
Penthode's Avatar
Penthode Penthode is offline
VideoKarma Member
 
Join Date: Jun 2009
Location: Kitchener/Waterloo Ontario Canada
Posts: 1,463
Quote:
Originally Posted by miniman82 View Post
Not sure where else the convergence voltage could come from, you need it from the horizontal for the waveforms. Maybe a tap from the flyback would be a better choice, then the cathode could be more normal with just a resistor.
If you look at the CTC5 circuit diagram for the horizontal output tube, you will see that the cathode is heavily AC bypassed to ground. There is no signal on the Horizontal Output cathode. The voltage drop on the Horizontal output tube cathode resistances (100 ohm pots and the 82 ohm resistor) is purely DC for static convergence only.

I am suggesting tying the cathode to ground. This will in effect copy the later chassis' CTC7 onwards. I am curious if it is not the reactances in the cathode circuit which reduces the flyback pulse amplitude and makes the HV supply soggy?

As for the DC supply for the static convergence, I was was thinking of constructing a separate regulated DC supply. The DC would be derived from the filament supply. A suggested diagram is attached.

Certainly, simply ignoring the static convergence and simply grounding the Horizontal Output Tube cathode right at the socket would test the HV supply and I will be game to try it when next I pull the chassis.
Attached Images
File Type: jpg CTC5 Convergence DC.jpg (25.3 KB, 37 views)
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:16 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.