Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #3  
Old 01-19-2013, 05:10 PM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
There are 3 things that generally cause the fuse to blow in a solid state TV set. The first thing is the diodes that make up the bridge rectifier that rectifies the incoming AC voltage. There could be four seperate diodes; or, it could be a bridge rectifier module. Checking these diodes with a DMM or VOM should give you a reading (using the Rx1 scale on a VOM or the diode test function on a DMM) in one direction and an open when you reverse the probes. If you get a reading both ways, the diode is shorted.

The next thing is the voltage regulator or other semiconductor devices in the PS. This regulator may consist of an IC or several individual components.

The third thing is the horizontal output transistor. HOT's usually don't short on their own and they usually short due to either a bad flyback transformer, bad caps in the power supply and/or horizontal drive circuits, or cold solder joints in the horizontal driver/output stage.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:48 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.