Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Antique Radio

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #14  
Old 01-18-2013, 08:12 PM
stusnyder's Avatar
stusnyder stusnyder is offline
VideoKarma Member
 
Join Date: Nov 2010
Location: northeast Pa
Posts: 486
Quote:
Originally Posted by Chip Chester View Post
On the gear detail...
I have a buddy with a desktop laser cutter. He can cut wood, phenolic, and non-PVC plastic (I think), but no metal. Runs of a CAD/CAM file. It's in a community/membership-based shop in Columbus. If the teeth are not too fine, I believe he could cut one of those in pretty short order.

I realize you've engineered a good solution, so you're no longer needing a replacement gear. But is this a common need out is resto-land? And do you think phenolic would hold up to the tuning duties?

(There are many of these community shops out there, too.)

Chip
From what I read most of these potmetal gears just crumble. I have no idea how many of these are still in the "wild" or the demand for such pieces. The small gear on the other end of the knob shaft was not pot metal, but some kind of fiber. I Have a 3d printer and I was going to try to print one, but it would have had to be made in 4 pieces and then bonded together.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:17 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.