pansonic 1" kinescope

[Geist]

Hi All;
Eric, I looked at your other posting, and they are probably similiar.. Though mine has no markings, other than like c?? or r??... I have a gray coaxial which is most likely video.. and on that same connector, is a red, yellow, orange and brown wire.. On a connector on the other end, along with some Led's is a black wire and a blue wire.. I think the Black wire is ground.. Which wires does your use ?? Color wise and where do they connect ?? Mine has two variable resistors on the side, and a place for one on the front, though nothing is there, along with a missing resistor.. The only other markings that I see are along one side, just above the flyback, which says VJBW 0206 (and below that) Head Reference NO-9.... As near as I can tell visually , all the CAPS look fine..
THANK YOU Marty