Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #5  
Old 12-19-2012, 12:20 AM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
I'm trying to visualize what tuner you have. From what you describe, it sounds like an early version of the single knob varactor tuners that Zenith used from the mid '70's until the mid '80's. The non-remote versions had a single silver channel selector knob and the remote versions had a motorized tuner without the channel selector knob.

Both versions used an 18 position tuner. Channels 2-13 were VHF and positions U1-U6 could be set to whatever UHF channel was needed and the Ux tab could be replaced with the correct channel number. In order to set the channels on those models, you first need to set the channel selector to the desired channel position. Then, set the AFC switch to "off". Then, there is a white knob on the control assembly. Push this knob in and slowly turn the knob until you get the best picture. You might have to turn the knob clockwise or counterclockwise in order to obtain the best picture. Once you have a good picture, turn the AFC switch back on.

If you can show a picture of the control panel of your TV, we can probably more easily help you on this.
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:10 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.