![]() |
|
|
|
#1
|
||||
|
||||
|
Quote:
It is very likely a Taiwan-built set with the Capehart name put on the base of the CRT mask; it is almost certainly not a true Capehart, as none of the real Capeharts were solid state (Capehart's heyday was in the early-mid-1950s). Moreover, the original Capehart TVs never had the words "Cape-Scan" on their front control panels, and none of them, to the best of my knowledge, ever had remote control or were table models. This set is typical of most TVs today with once-famous TV manufacturers' names on them -- RCA, Zenith, GE, Magnavox, et al. -- but don't let the name fool you. These are simply offshore-manufactured sets. The famous name is, almost literally, slapped on them to fool the buyer into thinking he or she is buying a quality TV. They will find out it is junk when the set breaks down after a year or two, and no service data or parts are available -- same as with today's flat screens. Does this set work at all or just sit there doing nothing, except possibly click (a power relay opening and closing) or, worse, blow a fuse, when turned on? If the latter, that may be exactly why it was left in the alleyway behind your apartment. It probably isn't worth repairing, otherwise I'm sure the original owner(s) would have kept it and would still be using it today -- on a cable box or with an OTA converter box. BTW, this is the first remote-control TV I've ever seen with a mute button on the front panel. Most televisions with remotes have that button on the hand unit, not on the set. The idea of the mute button, after all, is to mute the TV sound during commercials, etc. without having to getting up from your chair or couch to do it. Maybe this TV was designed this way just to be different from the competition.
__________________
Jeff, WB8NHV Collecting, restoring and enjoying vintage Zenith radios since 2002 Zenith. Gone, but not forgotten. Last edited by Jeffhs; 12-15-2012 at 12:00 AM. |
|
#2
|
|||
|
|||
|
I have the same thing but with tuning knobs, makes a great pic, I got it for my wife back as a kitchen set, very little use so the CRT is still very strong.
|
|
#3
|
||||
|
||||
|
Quote:
Quote:
Last edited by bandersen; 12-15-2012 at 12:54 AM. |
|
#4
|
|||
|
|||
|
Quote:
|
|
#5
|
||||
|
||||
|
Quote:
__________________
|
| Audiokarma |
|
#6
|
||||
|
||||
|
Quote:
RCA did that? I could see something like this happening after RCA was bought out by Thomson in the late '80s and '90s, but not in the early 1980s. I was very surprised to find this out, but maybe I shouldn't have been, as this may have started just after Thomson took over RCA's television/video plant. I have an "RCA" branded Thomson-built color TV with the infamous on-board tuner, and yes, I did have the set repaired twice, at my expense, for the same problem (broken antenna connector). The ground points around the tuner were resoldered after the second repair. The TV has continued to operate flawlessly since, although it is now in storage after being replaced with a flat screen almost 18 months ago. I know there have always been private-label TVs (I had one that burned up after just three years), but to put RCA badges on cheap offshore-made VCRs...... I wonder who actually built those VCRs in the first place. I do know that "GE" branded VCRs were made by Panasonic in the mid-'80s; I had one that lasted six years before the heads wore out. Today I have a true Panasonic VCR that has lasted over 10 years, with no problems whatsoever -- though I had a Panny VCR before that one that ate a tape and had to be nearly wrecked to get the cassette out. Too bad, since that VCR had VCR Plus and would have been a classic by now. Today's DVRs do not have anything like the VCR Plus system, to the best of my knowledge; in fact, the entire system must have been scrapped and forgotten, as I no longer see VCR Plus codes in my newspaper or in TV Guide magazine. I would think today's DVRs would have something similar, in addition to all the other bells and whistles most of them seem to have. However, as to "RCA" branded cheap offshore-made VCRs, I don't know. Could have been manufactured by literally any one of 1001 offshore companies.
__________________
Jeff, WB8NHV Collecting, restoring and enjoying vintage Zenith radios since 2002 Zenith. Gone, but not forgotten. Last edited by Jeffhs; 12-17-2012 at 02:06 PM. |
![]() |
| Thread Tools | |
| Display Modes | |
|
|