![]() |
|
|
|
#1
|
||||
|
||||
|
It took a while, but eventually, I tracked the problem down to this 3.3M resistor that had gone open. I took a while because I tried measuring it in circuit and by coincidence it measured about 3.3M across it.
After exhausting other possible bad resistors, I came back to this one and disconnected one end. Sure enough - infinite resistance. That got me good sound, now to try for some video. ![]() First though I had to replace a busted brightness pot ![]() ![]() Then using an 8XP4 test CRT only produced a faint, ghostly image. ![]() Next I'll try the 14XP4. |
|
#2
|
||||
|
||||
|
Hi, you seem to get getting through these Zeniths at a good pace. At least servicing and access is easy. It seems those pots are the biggest headache with that chassis. I've struck that phantom resistor syndrome before where across the open resistor it reads roughly the same... But having the identical resistance would have been a pain though...
These things are sent to try us.... .. This chassis looks like its coming back to life Cheers Glen
__________________
Visit my Vintage TV & Radio Page - http://nzvintagetvradio.blogspot.com/ My YouTube Link - http://www.youtube.com/user/glenz1975?feature=mhsn |
![]() |
| Thread Tools | |
| Display Modes | |
|
|