Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #8  
Old 12-07-2012, 07:51 AM
DaveWM DaveWM is offline
VideoKarma Member
 
Join Date: Feb 2009
Location: Orlando FL
Posts: 5,607
a simple RF modulator will allow the tv to work with most video devices. It will output to channel 3 or 4, and you feed it a audio signal and a composite video signal for the input.

As far as value from a kids perspective, I use my old tvs as learning tools for a generation that would otherwise have no clue about the history of manufacturing in the US. There is something about old tube sets that is captivating, when my kid friends would come over they were all fascinated by glowing tubes. Beside there is a LOT of good programing that is in BW for the kids (and adults) to watch, there is more to life that video games.

My DD has gone on to study electrical engineering, and I would like to think that the early introduction to old tv tech may have spurred that interest.

TCM has loads of programming in BW as does the Military Channel

I would keep the set intact, and just get a cheap flat screen to set on top for the video stuff anyway. Save the CRT for those special occasions like viewing Casablanca or The Fountain Head or maybe Sargent York.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:16 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.