![]() |
|
|
|
#1
|
||||
|
||||
|
It's possible they wanted that control to open up for max volume on distant station's, or alternately it may have been a simple design flaw in the controls operation. In general people were a lot more able to overlook the little technical imperfections back in the early days of radio. Obviously it took a fair amount of talent to navigate those early radio's.
I looked over the pictures in your link - a very nice job on your restoration. I can really appreciate all the time and effort that went into that set. |
|
#2
|
||||
|
||||
|
Yes. Your restoration looks very good. Congratulations.
The antenna volume control was very common in the twenties, before AGC. 400 ohms seems a little low however. And I am suprised that a wirewound control is used as it is inductive. Typically the rheostat antenna volume controls I have seen are between 5kohm to 20kohm carbon resistors in later twenties and early thirties sets. |
![]() |
| Thread Tools | |
| Display Modes | |
|
|