Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #9  
Old 12-06-2012, 06:36 PM
Penthode's Avatar
Penthode Penthode is offline
VideoKarma Member
 
Join Date: Jun 2009
Location: Kitchener/Waterloo Ontario Canada
Posts: 1,463
Quote:
Originally Posted by NewVista View Post
If feeding forward, C402 would be adding in-phase What are they up to?
Through both stages, a lot of response tweaking C401, C407, L401, L402, L403, C110, C404, L404, L405

I have to question how well ~1meg DC path can maintain clamped video
I suspect there was a lot of fiddling to get a reasonable frequency responce and perhaps compensate for the behaviour of the delay line.

Besides adjusting the brightness by changing the second video amplifier bias, the brightness control also varies the amount of dc component fed to the control grid of the second video amplifier. R407, both halfs of R101A plus the resistor not depicted attached to the horizontal output tube negative bias form the divider chain. I think the 1 megohm dc path is not an issue because the input of the tube is high impedance at DC anyway.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:13 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.