Starting on a 1961 Zenith SC B&W

[Eric H]

OK, the restoration is done <lol>

Actually all I did was spray out the pots and take inventory of any special caps I'll need (one .015@1000v) then I fired it up on the bench to see what's what and it just worked, so typically Zenith.

It made some arcing and snapping around the yoke area at first, I though because the CRT has no Dag coating, but the Vertical jumped in and out while it was doing that, finally settling down and staying working.
I don't know what fixed it but I still plan to recap it, it works perfect though with very strong sound from it's 6BQ5 output tube.

The remote receiver is working too, I can command the channel up/down and Mute, the On button on the remote is broken so I had to operate the relay by hand to get it started.