![]() |
|
#17
|
|||
|
|||
|
First, GET THAT SOLID STATE TUBE OUT OF THERE!! and put the right regular tube in there.
You cant test those two diodes with a multimeter. You need to use something that applys in excess of 200volts like an eye type tube tester in the leakage test mode. The smaller of the two diodes is the boost diode. Check with you meter to verify you have boost voltage coming out of it. The long one is focus. BUT, those solid state tubes can cause all kinds of issues like super high voltage. |
| Thread Tools | |
| Display Modes | |
|
|