![]() |
|
#11
|
||||
|
||||
|
Dunno.....ALL of the little TRs use the same one with the funny little squared off tip. I thought it was 7.5v unit....but could be entirely wrong. Almost positive it is NOT 12vdc though...or I would not have gone through the trouble to find the exact one when I needed one. If you are using a 12v one.....you are likely gonna cook the regulator. The battery pack is 4 x AA size batteries...so the set likely runs at 6v internally without looking at a schematic, so I'm still guessing the wall wart is gonna be 7.5vdc.
UPDATE: Found one of mine specific to the set. It's part number (Panasonic) TY-AC39P Input is AC 120V 60Hz 55mA Output is 11.45vdc (positive tip) as measured by a Fluke meter (no load) There is no output specs printed on the outside of it. I even found a second one that is running my 1020....same exact model and specs. Looks like all three of the little TR series use the exact same one. I don't have the CT101 down here at home to look at (It's up at my Dad's house)
__________________
My current "holy grail" is trying to get enough parts together to get a Singer TV6U going. Been kicking my ass for nearly a year now :-P Last edited by AiboPet; 11-13-2012 at 08:25 PM. |
| Thread Tools | |
| Display Modes | |
|
|