Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Transistor Portable Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 11-12-2012, 08:11 AM
timmy's Avatar
timmy timmy is offline
VideoKarma Member
 
Join Date: Jan 2011
Location: Delaware ny
Posts: 3,719
well i got the horiz deflection running and got 4700kv at the crt and 550 volts for focus only now i dont have verticle all i have is a line across the screen but i think i damaged the verticle deflection processor by probing and i think i touched 2 terminals and shorted it or the short was there when the diode went bad and now it shows since the horiz is running . now the verticle ic gets hot on the ic where there is voltage at the pin that should not have what it does. i subbed the focus diode for one i have but im going to put a 1n4007 which i think is 1000v 1a. this circuit supplys alot more then i thought being this diode was bad i had nothing. i located an electronics joint in la that has this verticle ic so i might as well just do it and get it over with. for anyone that wants to work on these little sets had better think twice because it is extremly difficult to get around inside without any wires breaking off or trying not to move the ribbons around. the ribbon already broke and i repaired it.

Last edited by timmy; 01-19-2016 at 11:23 AM.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:31 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.