![]() |
|
|
|
#1
|
|||
|
|||
|
I have one of those sitting right here next to me that working perfect. All origonal not one part replaced.
If you need any info or me to check anything like voltages on it let me know. Could be anything in the vert circuit from a bad pot to a small value cap. I think they use a VDR too that can cause issues. I would have to look at the schematic. |
|
#2
|
|||
|
|||
|
well i took it apart checked everything redid all of my solder work and cleaned the controls. it worked for a few minutes and started again then started making a weird buzzy hum and vertical would collapse and pop back. now all i can get is 3 very badly converged horizontal lines
|
|
#3
|
|||
|
|||
|
Try a new tube first then if that doesnt work start checking dc voltages. Do you have the schematic for it?
|
|
#4
|
|||
|
|||
|
i do not have the schematic also dont have another tube but ill try and get one next chance i can.
heres a pic of what its doing now http://i159.photobucket.com/albums/t...7/DSC02317.jpg |
|
#5
|
|||
|
|||
|
don't leave it like that, you can damage the CRT, turn the brightness down during trouble shooting.
|
| Audiokarma |
|
#6
|
|||
|
|||
|
i know i just turned it up so i could take a picture
|
|
#7
|
|||
|
|||
|
That looks like more than a vertical problem to me. The lack of width and foldover in the middle plus no convergence looks like it may be some kind of horizontal issue or power supply.
Im sure i have the schematic around here and can scan it if it would help. I have a feeling thats going to be a tough one to fix so get the vicodin out |
![]() |
| Thread Tools | |
| Display Modes | |
|
|