Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #4  
Old 10-16-2012, 11:15 AM
DaveWM DaveWM is offline
VideoKarma Member
 
Join Date: Feb 2009
Location: Orlando FL
Posts: 5,607
should be nice, easy to work on, vert chassis. don't worry if the fly looks bad, they all do. CRT may test weak but if it does it may still produce a good. Issues tend to be the vert height and vert lin pots. uses a doubler for B+ frequently the big doubler caps will be shorted or open. Has plug in top hat diodes in the doubler circuit. Has a "magic eye" which dims the pic in bright lights. this may fool you if you are looking at it in a dark room as the raster will be dim as well.

I would start by checking or just replacing the doubler caps, one will be easy (the cardboard covered single section) the other doubler cap is part of a 3 or 4 section can that is grounded to the chassis.

I had a persistent hula (very slow wave that moves vertically) too slow for a hum bar. I turned out to be a poor ground connection at the sweep board. The vert chassis relies on compression of the PCB using screws for the ground to the chassis. just clean under and tighten them up if you see this happen.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:28 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.