![]() |
|
|
|
#1
|
|||
|
|||
|
Those small TRF's are kind of neat to work on, once in a while.
It looks to me that, the tube on the rear right of the chassis is a glass ballast tube. That could be the tube with the loose base. The other tubes would be a 6D6, 6C6, 43 and a 25Z5. It also looks like it has a choke as well as a field coil. I like that kind of dial too.
|
|
#2
|
||||
|
||||
|
Quote:
__________________
Yamaha CR 2020, Sansui 4000, Marantz 2220B, Marantz 4270 Sansui 8080DB, Carver 6200 Pilot 240, Magnavox 8802 Boston Acoustics A150 Polk 10A Spica TC-60 NHT SuperZeros Wharfedale W70E Last edited by archie2; 10-13-2012 at 03:36 PM. |
|
#3
|
|||
|
|||
|
Quote:
Don't worry about the tubes for now. Recap the radio and then check the performance. |
|
#4
|
||||
|
||||
|
Thanks, that is my plan. I'm listing the caps as I type for ordering. I'm not changing the mica caps, just the electrolytics and I'm using a higher voltage than the original (eg 650V for the 400V and 50V for the 25V).
__________________
Yamaha CR 2020, Sansui 4000, Marantz 2220B, Marantz 4270 Sansui 8080DB, Carver 6200 Pilot 240, Magnavox 8802 Boston Acoustics A150 Polk 10A Spica TC-60 NHT SuperZeros Wharfedale W70E |
|
#5
|
|||
|
|||
|
Quote:
The radio has only a 120 volt B+ supply. |
| Audiokarma |
|
#6
|
||||
|
||||
|
Quote:
__________________
Yamaha CR 2020, Sansui 4000, Marantz 2220B, Marantz 4270 Sansui 8080DB, Carver 6200 Pilot 240, Magnavox 8802 Boston Acoustics A150 Polk 10A Spica TC-60 NHT SuperZeros Wharfedale W70E Last edited by archie2; 10-14-2012 at 04:02 AM. |
![]() |
| Thread Tools | |
| Display Modes | |
|
|